La diferencia entre el policloruro de vinilo (PVC) y el material TPE
1. Diferencias estructurales: tpe: polímero hidrocarburado; PVC: polímero hidrocarburo que contiene hidrocarburos clorados.
2. La diferencia en la gravedad específica: tpe: la gravedad específica es 0,84-1,4, que es más ligera; PVC: La gravedad específica suele estar entre 1,2 y 1,4.
3. La diferencia de dureza: rango de dureza del TPE: 0A-60D rango amplio de dureza; La dureza del material de PVC blando es de 50A-90A.
4. Diferencias en las propiedades mecánicas: TPE: excelentes propiedades de tracción, resistencia a la tracción de hasta 12 MPa, alargamiento al romper hasta 10 veces, alta resistencia mecánica; PVC: Alta resistencia mecánica.
5. Differences in temperature resistance: TPE can withstand temperatures above 70°C for a long time, and its maximum operating temperature is 100°C. It can still maintain a good shape at a low temperature of -40°C; PVC material can withstand low temperatures -15°C-60°C, light and heat Poor stability, the softening point of the material can be lowered to 80°C in an environment above 100°C or in a light environment, and decomposes in a high temperature environment of 130°C, and precipitates hydrogen chloride, which is an irritating gas.
6. Differences in chemical resistance: TPE is corrosion-resistant, ozone-resistant, ozone aging (38°C), performance drops below 10% in 100 hours, resistant to water, acid, alkali, alcohol and other solvents, and can be soaked in solvent or oil for a short period of time; PVC has high chemical resistance and corrosion resistance, but it is not resistant to ozone. It is a strong acid, such as concentrated sulfuric acid and concentrated nitric acid, and cannot be in contact with aromatic hydrocarbons and chlorinated hydrocarbon substances.
7. La diferencia en la combustión: TPE: El material no contiene halógeno, el humo en combustión es bajo y no tóxico, y emite fragancia al arder; El PVC libera una gran cantidad de humo y gases irritantes.
2. La diferencia en la gravedad específica: tpe: la gravedad específica es 0,84-1,4, que es más ligera; PVC: La gravedad específica suele estar entre 1,2 y 1,4.
3. La diferencia de dureza: rango de dureza del TPE: 0A-60D rango amplio de dureza; La dureza del material de PVC blando es de 50A-90A.
4. Diferencias en las propiedades mecánicas: TPE: excelentes propiedades de tracción, resistencia a la tracción de hasta 12 MPa, alargamiento al romper hasta 10 veces, alta resistencia mecánica; PVC: Alta resistencia mecánica.
5. Differences in temperature resistance: TPE can withstand temperatures above 70°C for a long time, and its maximum operating temperature is 100°C. It can still maintain a good shape at a low temperature of -40°C; PVC material can withstand low temperatures -15°C-60°C, light and heat Poor stability, the softening point of the material can be lowered to 80°C in an environment above 100°C or in a light environment, and decomposes in a high temperature environment of 130°C, and precipitates hydrogen chloride, which is an irritating gas.
6. Differences in chemical resistance: TPE is corrosion-resistant, ozone-resistant, ozone aging (38°C), performance drops below 10% in 100 hours, resistant to water, acid, alkali, alcohol and other solvents, and can be soaked in solvent or oil for a short period of time; PVC has high chemical resistance and corrosion resistance, but it is not resistant to ozone. It is a strong acid, such as concentrated sulfuric acid and concentrated nitric acid, and cannot be in contact with aromatic hydrocarbons and chlorinated hydrocarbon substances.
7. La diferencia en la combustión: TPE: El material no contiene halógeno, el humo en combustión es bajo y no tóxico, y emite fragancia al arder; El PVC libera una gran cantidad de humo y gases irritantes.